Scaffold Plank consists of three thinner planks pinned together down the length of the board. In addition, these boards are safer, if any one of the three pinned planks experience a failure, damage or split, the other two boards are still there to provide support. This reduces the likelihood of an accident. Just like our standard scaffold boards, this plank is OSHA tested, stamped, and approved. We carry several different lengths depending on your needs.
EM400-400
EM400-400
EM400-400
EM400-400
The replacement hook for the aluminum scaffold board will replace damaged hooks on our solid aluminum scaffold boards. When your hooks get damaged, you can save a lot of money by just replacing them instead of the entire board. Keeping fresh hooks on your boards also makes them safer.
This folding A-frame scaffolding is a very versatile scaffolding. It is sturdy enough to hold a lot of weight and be used for masonry and exterior projects. It’s small size and ability to fold makes it great for interior projects. The folding A-frame scaffolding can also be used to make a large and stable mobile work bench.
This tough, three-legged scaffold is ideal for both interior and exterior work with uneven and difficult ground conditions. The Bronco all-terrain scaffold also has an extra-wide frame (up to 42 in. base spread) and tapered tripod provide unmatched stability and easy plank access.The Bronco weighs only 16 lb and folds flat for easy storage and transport. Because of this, no matter the project—siding, roofing, painting, windows or masonry work—the Bronco will stay stable on any terrain.
Snap-on style guardrails are designed to fit our snap-on frames. These guardrails have a locking mechanism on each end that lock onto frame posts. Our guardrails are made from high-quality galvanized steel.
EM400-105
EM400-108
EM400-110
Use this side bracket to make your scaffolding platform larger or to create an additional work platform at a different level. This bracket adjusts from 20″ to 30″ depending on your needs. At 20″ it will hold 2 scaffold planks and at 30″ it will hold 3 scaffold planks or 1 aluminum board. This side bracket has a saddle for additional strength and stability and contains a square tube top bar.
EM400-093
EM400-094
EM400-095
EM400-096
EM400-097
EM400-098
He have 30 inch Outriggers For Frame Scaffolding. These outriggers attach to your existing full size frames. Each outrigger is 30 inches wide. 4 outriggers will expand the width of your scaffolding tower by up to 60 inches, adding stability to your scaffolding and allowing you to safely go higher with your work platform before you need to tie off. These outriggers will accept both leveling jacks and casters and will work with Safeway, Waco, Bil-Jax, and Snap-On Scaffolding frames.
Our scaffolding access ladder comes in both 6′ and 3′ sizes. These external ladders are a safer and more efficient method of accessing a scaffolding platform than climbing the frames. In certain situations, they are required by OSHA – in particular, these ladders are required when using walk-thru masonry scaffolding frames, because there is no way to safely climb the scaffolding frame.
The 9inx1-7/16in S-Style Coupling Pin is used to connect the blue Safeway-Style scaffolding frames. This coupling pin fits Safeway style scaffold frames and accessories.
This Pin-Lok Scaffold Plank consists of three thinner planks pinned together down the length of the board. The result is a 10″x 2″ board that has a higher load capacity that is less likely to warp. In addition, these boards are safer, if any one of the three pinned planks experience a failure, damage or split, the other two boards are still there to provide support. This reduces the likelihood of an accident. Just like our standard scaffold boards, this plank is OSHA tested, stamped, and approved. We carry several different lengths depending on your needs.
EM400-085
Whether you’re a professional contractor working on a commercial building or a do-it-yourselfer working on a home project, this 6ft multipurpose/bakers scaffold unit will meet your needs. Comes in 6′ tall units which consist of two frames, a deck and four casters. The deck has many height adjustment options.As with all our scaffold products at USA scaffolding, this unit is made from high-quality steel and a powder coat finish. Easy to assemble and transport with 5″ Locking casters. Will fit though a standard doorway. If more height is needed, all you have to do is add another unit along with guardrails and outriggers. If you need a scaffold tower, we sell a bakers scaffold tower package that comes with everything you need to go up higher but at a lower price than purchasing all items individually.
Set of Veneer Jacks. Each set includes a frame, two legs and two pigtail pins.
This 5ftx6ft4in walk-thru frame set is great for masonry and any other application where a long, contiguous working platform is needed and worker access across an entire wall is important. These are our best-selling scaffolding frames. At 5ft wide, these frames provide great stability and allow for comfortable traverse through the frames. A wheel barrow can easily pass through them. These frames have been tested at Texas A&M. A scaffolding set will hold, on average, 41,000 lbs. The 5ftx6ft4in walk-thru frame set includes 7ft scaffold cross braces, coupling pins and spring clips.
EM400-070
EM400-071
EM400-072
EM400-073
EM400-074
This walk-thru scaffold frame is made from high-quality (not recycled) steel and is strength-tested to ensure quality.
EM013500
EM015606
EM013600
EM015607
EM015625
EM015605
EM015666
EM015506
This 3ftx6ft4in walk-thru frame is designed for stucco work and is our most popular among stucco and plaster contractors. This is a Safeway style match frame that is light, easy to assemble, easy to transport. At 3ft wide, this scaffolding requires fewer planks and will fit in tight spaces. If going up past 12ft, you will need to tie off to the wall. We also carry half-high frames that will fit this scaffolding.
This 3ftx10ft8in snap-on frame set is a West Coast and stucco contractor favorite. Each set comes with two frames, four 10′ cross braces and four pins for stacking. This scaffolding is great for working above a wall with a wainscot or working just underneath a soffit. This 3ftx10ft8in snap-on frame set comes with two frames, four 10′ cross braces, and the stacking pins. Note that each frame set requires an upper and lower cross brace.
Double Ladder Scaffold Set of Waco style 5ft x 6ft7in Double Ladder Scaffold Frames. The ladder portion of these frames provides multiple platform locations for working, materials or tools. It is also climbable making these frames an excellent choice for a scaffold tower or as end pieces to a masonry scaffolding platform. Frame sets include 7ft Scaffold Tube Cross Braces, Coupling Pins and Spring Clips.
W-Style Ladder Scaffold Set is made up of 3ftx6ft7in Waco style ladder scaffold frames, 7ft Scaffold Tube Cross Braces, Coupling Pins and Spring Clips. It is great for a large variety of applications including painting and interior work. Use with our casters and aluminum planks to make a mobile work platform.
Safeway-style ladder scaffold frame set includes 7ft scaffold tube cross braces, coupling pins and spring clips. These 2′ wide frames are great for interior applications. They are easy to carry, set up quickly and will fit through doorways. Add casters and an aluminum plank to create a rolling platform.
This double ladder frame set is made up of 2 Safeway style frames with two ladder rungs and includes 7ft scaffold tube cross braces, coupling pins and spring clips.
This 5ftx2ft ladder frame set is made up of “half high” Safeway style ladder scaffolding frames with ladder rung. All scaffold frames between 2′ and 4′ in height are often referred to as “half high” scaffold frames. These “half high” frames require a 7’X1′ or 10’X1′ cross brace. The 5ftx2ft ladder frame set includes 7ft scaffold tube cross braces, coupling pins, and spring clips.
EM400-047
EM400-048
EM400-049
EM400-050
EM400-051
EM400-052
Our 3ftx10ft8in Snap-On Apartment Frame measure is apartment sized and has walk-thru functionality. These frames are very popular with stucco contractors in Western states. Each frame requires two cross braces.3ftx10ft8in Snap-On Apartment Frame is different from other styles in that the locking mechanism for the cross brace is on the cross braces and not the frame. These frames require snap-on style cross braces that are not compatible with Safeway, Waco of Bio-Jax style scaffolding frames.
This 5ftX6ft7in Double Ladder Frame is a Waco-style heavy duty scaffold frame. It is great for masonry work and applications where access across a long wall is needed. Build the perfect scaffold work platform using this 5ftX6ft7in Double Ladder Frame, our scaffold cross braces, and the proper scaffold frame coupling pins.
This Waco style 5ftx2ft1in single ladder frame is a versatile scaffold frame. Small enough for painting and interior applications. Strong enough for exterior commercial projects. Build the perfect scaffold work platform using this 5ftx2ft1in single ladder frame, our scaffold cross braces, and the proper scaffold frame coupling pins.
EM400-038
EM400-039
EM400-040
EM400-041
EM400-042
EM400-043
Safeway style scaffold frame made of high quality steel.
Safeway style double ladder scaffold frame is often used in masonry work.
Our 21ft Rolling Scaffold Stair Tower Kit with Outriggers provides a stable working platform with a high weight capacity and mobility. This tower provides you with 35 sq. ft. of working space, is easy to assemble, and has stairs for easy access to the top and a guardrail set for extra safety.
EM400-023
EM400-024
EM400-025
EM400-026
EM400-027
Our 7ft Rolling Scaffold Stair Tower Kit provides a stable working platform with a high weight capacity and mobility. This tower provides you with 35 sq. ft. of working space, is easy to assemble, and has stairs for easy access to the top and a guardrail set for extra safety.
EM400-018
EM400-019
EM400-020
EM400-021
Our 20ft Stationary Tower with Ladder (USA-ST-20L) provides a stable working platform with a high weight capacity and ladders for easy access. This tower provides you with 35 sq. ft. of working space, is easy to assemble, and has a guardrail set for extra safety.
Our 20ft Stationary Scaffold Stair Tower Kit with Outriggers provides a stable working platform with a high weight capacity. This tower provides you with 35 sq. ft. of working space, is easy to assemble, and has stairs for easy access to the top and a guardrail set for extra safety.
The 7ft stationary stair tower has all the components you need to build a OSHA compliant scaffold platform 7ft high with stairs that makes access to the top a breeze. Please note, this 7ft height is where your feet will be at, the guardrail components will be higher.